Washington · Oversize & Overweight

Washington Oversize & Overweight Permits filed with WSDOT for you, 24/7

In Washington, oversize and overweight permits come from WSDOT Commercial Vehicle Services, and only for loads that cannot be divided. A load over 8 ft 6 in wide or 14 ft high needs one, and so does weight past the axle and spacing table, which tops out at 105,500 lbs. A single-trip permit runs 3 days; around Seattle, Tacoma, Vancouver and Spokane, weekday curfews keep wider loads off the freeways. Send us the load and route: our permit desk quotes the price and files it for you.

What will an oversize permit in Washington cost?

Enter your pickup and delivery locations, choose your permit type, and compare estimated permit costs across route options.

  1. Oversize and overweight permits across the lower 48 and DC
  2. State-by-state fee breakdown for each route option
  3. Order your permit or talk to a specialist

Washington rules

Washington legal limits and permit rules

What Washington allows without a permit, how far a permit can stretch it, when pilot cars come along and when a permitted load may run.

Legal limits without a permit

Width
8 ft 6 in
Height
14 ft
Tractor-trailer
53 ft trailer
Single unit
40 ft
Truck and trailer
75 ft overall
Overhang
3 ft front, 15 ft rear
Single axle
20,000 lbs
Gross, by axle spacing
Up to 105,500 lbs

How far a permit stretches it

Width, two-lane highway
14 ft
Width, multilane with a median barrier
20 ft
Width, multilane undivided
32 ft
Height
Set by the clearances on the route
Single axle
22,000 lbs
Tandem axle
43,000 lbs
Tires
600 lbs per inch of width, or the tire rating if lower
Truck and trailer with an overlength load
85 ft overall

Pilot cars

Over 11 ft wide on two-lane highways
Front and rear
Over 14 ft wide on multilane highways
Rear
Over 20 ft wide on multilane undivided highways
Two
Over 14 ft 6 in high
Front, with a height pole
Trailer and load over 105 ft, two-lane
Rear; over 125 ft on multilane, rear
Rear overhang over 1/3 of the trailer, two-lane
Rear
Driver can't see 200 ft behind
Rear, on every highway

When you can move

Night
Up to 12 ft wide, 14 ft 6 in high and 105 ft long; larger only with night movement approved on the permit
Commuter curfews
Weekday mornings and afternoons on listed Seattle, Tacoma, Olympia, Vancouver, Kelso and Spokane routes
Holidays
From noon the day before New Year's, Memorial Day, Independence Day, Labor Day, Thanksgiving and Christmas; also the day after Thanksgiving
Visibility
No moves under 500 ft
Winter signs
No permit moves where traction advisory or chains-required signs are posted

Source: RCW 46.44.041, 46.44.091 and 46.44.092; WAC 468-38-070, 468-38-100, 468-38-175 and 468-38-405; WSDOT Commercial Vehicle Services permit types, superloads and curfew hours; WSDOT Form 560-002 Special Motor Vehicle Permit Regulations and Conditions. Your permit's own conditions always apply.

Which permit you need

Washington permits for oversize and overweight loads

  1. One route, 3 days

    Single-trip permit

    WSDOT issues single-trip permits for non-divisible loads that are oversize, overweight or both, written for one route and valid 3 days.

  2. 30 days

    Non-divisible load permit

    A 30-day permit for loads over size only, up to 14 ft wide, 15 ft high and 125 ft long. The length cap depends on the combination.

  3. 30 days or a year

    Single and double trailer permits

    For divisible freight on a semitrailer up to 56 ft, or on doubles up to 68 ft, beyond the legal length.

  4. Over 16 ft wide or high, 125 ft or 200,000 lbs

    Superload

    Requested in writing 7 calendar days ahead for size and 30 days ahead over 200,000 lbs, with a route, a traffic control plan and a review of rail or barge as an alternative. WSDOT then analyzes bridges and pavement.

Routes and road rules

Where Washington routes add their own rules

Puget Sound freeways close to wider loads at rush hour, the Cascade passes shut to permit moves in winter, and every move stops for holidays.

  1. I-5 and I-405, Seattle to Everett

    On weekdays, loads under oversize signs stay off I-405 6–9 a.m. and 3–7 p.m. and off I-5 between SR 512 and SR 531 at listed hours. A load over width only, no wider than 9 or 10 ft, is exempt.

    Departure:We set start times around each segment's window.

  2. I-90, Spokane: Medical Lake to Liberty Lake

    Loads over 11 ft 2 in wide stay off this stretch 6–9 a.m. and 3–7 p.m., Monday through Friday, in both directions.

    Seattle end:I-90 from I-5 to the Sunset interchange has curfews at 10 ft.

  3. I-90 Snoqualmie, US 2 Stevens, US 12 White Pass

    From November 1 to April 1 trucks over 10,000 lbs carry chains on these routes. Where a traction advisory or chains-required sign is posted, permit moves stop.

    Plan:Room in the schedule to wait out a closure.

  4. I-5 and I-205 at Vancouver

    Northbound I-5 from the Oregon line closes 3–6 p.m. and southbound 6–9 a.m.; I-205 runs 4–7 p.m. north and 6–9 a.m. south, for loads over 10 ft wide.

    Crossing from Oregon:We time the bridge outside both windows.

Washington loads

Permits for the freight Washington moves

Beside single-trip and 30-day permits, WSDOT writes permits for port containers, orchards, ranches, timber and housing.

  1. Port of Tacoma

    Heavy haul corridor

    Sealed shipping containers on SR 509, mileposts 0.25 to 5.7, under a 30-day or annual permit.

  2. Orchards

    Empty apple bins

    Loads of empty apple bins up to 15 ft high, by the month or the year.

  3. Timber

    Log tolerance

    Extra weight for a three-axle log truck with a two-axle pole trailer, good until March 31.

  4. Housing

    Manufactured homes

    Monthly or annual permits up to 15 ft wide with the eave, 15 ft high and a 75 ft trailer. Over 15 ft high, a front pilot car carries a height pole.

How it works

Your Washington permit in three steps

  1. Send the load and route

    Truck, trailer, dimensions, weight, origin and destination. Your fleet details are saved for next time.

  2. We check and file

    Our permit desk checks the Washington rules for your load and files with WSDOT Commercial Vehicle Services.

  3. Get your permit

    You get the permit PDF, a written route and an interactive route map to share with the driver.

From our permit desk

What we check before filing in Washington

  1. Which curfew does each segment carry?

    The windows and width limits change by direction and milepost around Seattle, Tacoma, Olympia and Vancouver. We read the table for every segment before we set a departure.

  2. County roads need their own permit

    A WSDOT permit covers state highways only; county roads and city streets need approval from whoever maintains them. We line up every jurisdiction on the route.

  3. Is the load really non-divisible?

    WSDOT issues oversize permits only for loads that cannot be divided, and a superload request has to prove it with a sketch or photo. We confirm it before filing.

FAQ

Washington oversize permit questions

Which Seattle-area freeways close to oversize loads at rush hour?

I-405 along its whole length, I-5 from SR 512 to SR 531, I-90 from I-5 to the Sunset interchange, and parts of SR 2, 18, 167, 518 and 522, on weekdays at listed morning and afternoon hours. A load over width only and within the 9 or 10 ft limit for that segment is exempt.

How much does a Washington oversize permit cost?

It depends on the permit type, the size or weight and the route. Put your route into our permit cost calculator for an estimate, or send us the load and our permit desk quotes the exact price before filing.

How big can a load be and still move after dark in Washington?

Up to 12 ft wide, 14 ft 6 in high and 105 ft long, legal overhang included. A larger load moves at night only if the permit says night movement approved, and it still follows the commuter curfews. Night runs from half an hour after sunset to half an hour before sunrise.

Can a permitted load cross Snoqualmie Pass in winter?

Not while a traction advisory with oversize vehicles prohibited, or a chains-required sign, is posted. Permit moves stop in those areas. From November 1 to April 1, trucks over 10,000 lbs also carry chains on I-90 between North Bend and Ellensburg.

How wide can a Washington permit go on a divided freeway?

20 ft on a multilane highway with a median barrier, 32 ft on a multilane undivided highway and 14 ft on a two-lane road. Wider loads are possible only on segments built to take them, and over 16 ft the move is a superload.

How early does a Washington superload request go in?

At least 7 calendar days before the move for a load over 16 ft wide or high, and 30 days over 200,000 lbs. The request needs a vehicle sketch, a route, a traffic control plan and a check of every railroad crossing.

How does Route One GO get my Washington permit?

Send us the truck, trailer, load dimensions, axle weights and spacings, and route. Our permit desk checks Washington's limits and curfews, files with WSDOT, and sends you the permit with a route map. Requests are taken 24/7.

24/7 permit desk

Need a permit in Washington for this load?

Send the details once. We file with WSDOT Commercial Vehicle Services, plus every other state on your route.