Maryland · Baltimore

Baltimore Oversize & Overweight Permits for city streets, port terminals and the harbor tunnels

Inside Baltimore the streets belong to the city, and Baltimore City DOT's Traffic Engineering team issues the permit and sets the route for an oversized truck on them. For Port of Baltimore moves the state can issue a joint state-city permit, but a heavy load bound for Dundalk over 120,000 lbs and 14 ft 6 in high still needs its own city permit, a night move and a Baltimore City Police escort. The tunnels and toll highways answer to MDTA. Send us the terminal, the load and the destination, and we file the city, state and MDTA pieces together.

Who issues what

One move through Baltimore, up to 3 permits

Each road owner issues its own permit. We check the route and file with every one of them.

  1. State highways

    MDOT SHA Motor Carrier Division

    Oversize & overweight permit
  2. City streets

    Baltimore City DOT

    City street permit
  3. Bridges and tunnels

    Maryland Transportation Authority

    Bridge and tunnel escort

Baltimore rules

What the city and MDTA ask of a Baltimore move

The state route sheet for heavy port loads, the city's curbside rules for commercial vehicles, and what MDTA sets for its tunnels.

Heavy loads and Dundalk Marine Terminal

Inbound over 120,000 lbs
I-95 Exit 59, Eastern Avenue, to the city line
Outbound to I-95 North
From the city line via Exit 57, O'Donnell Street
Over 120,000 lbs and over 14 ft 6 in high
Night moves only
Escort
Baltimore City Police
City permit
Separate from the state permit

Commercial vehicles on city streets

1 a.m. to 7 a.m.
No parking, standing or stopping on any city street, lane or alley
In front of a home
No longer than 1 hour for Class 6 and up
Exception
A vehicle engaged in loading

MDTA tunnels under the harbor

Hazardous materials
Banned in both the Fort McHenry and Harbor tunnels
Fort McHenry over 11 ft wide
Written permission of the tunnel administrator
Escort
When Transportation Authority Police direct one
Notice
At least 1 hour before the move starts

Source: Baltimore City Department of Transportation, Traffic Division and Right of Way Services Division; Baltimore City Code Article 31, § 6-26; MDOT SHA Maryland route restrictions and the joint Maryland State Highway and Baltimore City general conditions for hauling permits; COMAR 11.04.01.08 and 11.04.02.05; Maryland Transportation Authority; Maryland Port Administration.

Baltimore roads

Baltimore roads that decide a permit route

Where a Baltimore trip leaves the interstate for city streets, or has to pick a way across the harbor.

  1. I-95 Exits 59 and 57

    The state route sheet sends heavy Dundalk loads off I-95 at Eastern Avenue and back on at O'Donnell Street, so the last miles to the terminal run on city streets.

    City leg:Past the city line the move rides the Baltimore City permit and route.

  2. Crossing the Patapsco

    With the Key Bridge on I-695 still being rebuilt and expected to open in 2030, a load crosses the harbor through a tunnel or goes around on the western side of the Beltway.

    Tall or wide:The Harbor Tunnel on I-895 is the tighter of the two.

  3. Hazmat around the tunnels

    Neither the I-95 nor the I-895 tunnel takes hazardous materials, and MDTA points those trucks to the western section of I-695.

    Mixed loads:An oversize load that also carries hazmat is routed around the harbor from the start.

Baltimore freight

Where oversize freight moves in Baltimore

  1. Port of Baltimore

    Dundalk Marine Terminal

    The port's 570-acre general cargo terminal, with Ro/Ro storage, more than eight miles of rail inside the gate and cargo that includes project cargo and farm and construction equipment. It sits 2.5 miles from I-95 and 1.5 miles from I-695.

  2. Port of Baltimore

    Fairfield Marine Terminal

    A 150-acre terminal for autos, light trucks and Ro/Ro equipment such as tractors, agricultural vehicles and wheeled cranes, next to a CSX spur.

  3. Port of Baltimore

    Seagirt Marine Terminal

    The port's container terminal, run under a concession by Ports America Chesapeake.

How it works

Your Baltimore permit in three steps

  1. Send the load and route

    Truck, trailer, dimensions, weight, origin and destination. Your fleet details are saved for next time.

  2. We check and file

    Our permit desk checks the Baltimore rules for your load and files with Baltimore City DOT, Maryland Transportation Authority and MDOT SHA Motor Carrier Division.

  3. Get your permit

    You get the permit PDF, a written route and an interactive route map to share with the driver.

From our permit desk

How we build a Baltimore permit set

  1. Joint or separate city permit

    We check whether your port move fits the joint state-city permit or crosses the weight and height that call for a separate city permit, before anything is filed.

  2. Night move with city police

    When the load goes over 120,000 lbs and 14 ft 6 in to or from Dundalk, we line up the city permit and the police escort for the same night.

  3. The harbor crossing first

    Height, width and cargo decide between Fort McHenry, the Harbor Tunnel or the western Beltway, so we settle the crossing before we draw the city leg.

  4. No waiting at the curb overnight

    A commercial vehicle can't stop on a city street between 1 and 7 a.m., so we time arrival at the terminal or job site to avoid an overnight wait on the street.

Oversize & Overweight Permit Cost Calculator

Enter your pickup and delivery locations, choose your permit type, and compare estimated permit costs across route options.

  1. Oversize and overweight permits across the lower 48 and DC
  2. State-by-state fee breakdown for each route option
  3. Order your permit or talk to a specialist

FAQ

Baltimore permit questions

Who issues the oversize permit for Baltimore city streets?

Baltimore City DOT. Its Traffic Engineering team issues permits for oversized trucks and sets a safe route for them. We file that permit along with the state permit for the highways on the same trip.

Does one permit cover a move out of the Port of Baltimore?

It can. For port moves the state can issue a joint permit that also covers the city-controlled streets. The exception is a load over 120,000 lbs and 14 ft 6 in high to or from Dundalk, which needs a separate city permit as well.

When does a Dundalk load need a Baltimore City Police escort?

When it is over 120,000 lbs and over 14 ft 6 in high. That load moves at night only, behind a city police escort. We file the city permit and book the escort for the same night.

Which I-95 exits do heavy Dundalk loads use?

Over 120,000 lbs, the state route sheet sends the load off at Exit 59, Eastern Avenue, on the way in, and back to I-95 North through Exit 57, O'Donnell Street, on the way out. We build the city part of the route from those exits.

Can a load with hazardous materials go through the harbor tunnels?

No. Both the Fort McHenry Tunnel on I-95 and the Harbor Tunnel on I-895 ban hazmat, and MDTA sends those trucks around on the western side of I-695. We plan the whole trip on that route.

Is the Key Bridge an option for an oversize load?

Not yet. The bridge on I-695 is being rebuilt and is expected to open in 2030. Until then we route harbor crossings through a tunnel that fits the load or around the western Beltway.

What sets the price of a Baltimore permit package?

Whether the joint permit covers the trip or a separate city permit is needed, the load's weight and height, a city police escort or MDTA escort, and the state highway miles. We quote the whole package before we file.

24/7 permit desk

Need a permit in Baltimore for this load?

Send the details once. We file with Baltimore City DOT, Maryland Transportation Authority and MDOT SHA Motor Carrier Division, plus every other state on your route.