Georgia · Atlanta

Atlanta Oversize & Overweight Permits for city streets, the I-285 perimeter and the state routes

Streets on the state and federal highway system run on the Georgia state permit, but every other street in Atlanta answers to ATLDOT: a vehicle or load over 73,280 lbs gross, 8 ft wide, 55 ft long or 13 ft 6 in high needs the city's OS/OW vehicle permit. Inside I-285, a state permit is good only for a pickup or delivery there, and never 7–9 a.m. or 3–6 p.m. on weekdays. Tell us where the load starts and ends, and we file the city and state permits together.

Who issues what

One move through Atlanta, up to 2 permits

Each road owner issues its own permit. We check the route and file with every one of them.

  1. State highways

    GDOT / Georgia DPS

    Oversize & overweight permit
  2. City streets

    ATLDOT

    City street permit

Atlanta rules

What ATLDOT and the state attach to an Atlanta move

The thresholds and conditions in ATLDOT's published requirements for oversize and overweight loads, and the state's limits inside the perimeter.

When the city permit applies

Gross weight
Over 73,280 lbs
Width
Over 8 ft
Length
Over 55 ft
Height
Over 13 ft 6 in
Axle or wheel overweight
ATLDOT approval as well
Not covered
Streets on the state or federal highway system

Conditions on city streets

Escorts
Front and rear, with flashing lights and WIDE LOAD signs
Load marking
Red flags at the widest points
Streets allowed
Only those described in the permit
Trees on the route
Inspection and approval by Parks and Recreation
Insurance
Proof of liability cover for the mover and the equipment
Signs and mailboxes moved
Put back as good as before

Inside I-285 on a state permit

Through trips
Not valid
Pickup or delivery inside
Allowed, with proof the driver can show
Weekdays
Not 7–9 a.m. or 3–6 p.m.
Waiting for the window
No parking on interstate right-of-way

Source: City of Atlanta Department of Transportation (ATLDOT) oversize/overweight vehicle permits and its Requirement and Policies Governing Oversize/Overweight Vehicles and/or Loads; City of Atlanta Public Right-of-Way Manual; Atlanta Code of Ordinances Sec. 150-237 and the Freight ATL: Northwest truck route changes; Ga. Comp. R. & Regs. 672-2-.02 and 672-2-.03; and Hartsfield-Jackson Atlanta International Airport.

Atlanta roads

Atlanta streets and interstates to plan around

Where an Atlanta move crosses from the state network to city streets, or into areas the City keeps trucks out of.

  1. I-75, I-85 and I-20 inside the perimeter

    Every interstate mile inside I-285, the Downtown Connector included, falls under the state's perimeter rule, so only loads with an address inside get in, and not during the weekday morning or afternoon blackout.

    Waiting:A truck early for its window cannot park on the interstate right-of-way.

  2. State routes through the city

    Streets that carry a state or US number, such as Northside Drive (US 41/SR 3), belong to the state system, and the ATLDOT permit does not cover them.

    Turn off:The first city street after the state route is where the city permit takes over.

  3. Designated truck routes

    Atlanta's Code of Ordinances keeps vehicles with more than six wheels on city streets designated as truck routes, with exceptions mainly for pickup and delivery.

    Permit:It lists the exact streets, and no others are authorized.

  4. Northwest industrial streets

    Commercial cut-through truck traffic is banned on parts of Moores Mill Road, Bolton Road, Marietta Road and Joseph E. Lowery Boulevard, and ATLDOT has taken segments near the Beltline off the truck route network.

    Removed:Parts of Elaine Ave, Jefferson St, Huff Rd, Collier Rd and Howell Mill Rd, now signed against trucks.

Atlanta freight

Where heavy freight moves in Atlanta

  1. Production Conservation Areas

    The Atlanta Industrial Park, part of Fulton Industrial Boulevard, Inman Yard and the Chattahoochee Industrial District hold over half the land zoned for industry in the city.

  2. Airport cargo complexes

    Cargo buildings at Hartsfield-Jackson Atlanta International sit in the airport's North, South and Midfield complexes, together with airline support and maintenance facilities.

How it works

Your Atlanta permit in three steps

  1. Send the load and route

    Truck, trailer, dimensions, weight, origin and destination. Your fleet details are saved for next time.

  2. We check and file

    Our permit desk checks the Atlanta rules for your load and files with ATLDOT and GDOT / Georgia DPS.

  3. Get your permit

    You get the permit PDF, a written route and an interactive route map to share with the driver.

From our permit desk

How we prepare an Atlanta move

  1. Every street written in

    The ATLDOT permit authorizes only the streets it names, so we lay out the route from the last state route to the gate before we file it.

  2. The address inside I-285

    The driver has to be able to prove the pickup or delivery inside the perimeter, so the paperwork we send carries that address on every leg.

  3. Arrival outside the blackout

    With no waiting allowed on the interstate shoulder, we time the run to reach I-285 after the morning window or before the afternoon one closes it.

  4. Escorts and trees booked early

    City moves need front and rear escorts and a Parks and Recreation tree check along the route, so we line both up with the city filing.

Oversize & Overweight Permit Cost Calculator

Enter your pickup and delivery locations, choose your permit type, and compare estimated permit costs across route options.

  1. Oversize and overweight permits across the lower 48 and DC
  2. State-by-state fee breakdown for each route option
  3. Order your permit or talk to a specialist

FAQ

Atlanta permit questions

My Georgia state permit is approved. Do I still need ATLDOT?

Yes, once the load leaves the state and federal routes for a city street and goes over the city's limits. The state permit covers only its own system, and the ATLDOT permit covers the streets the City maintains. We file both from one request.

At what size or weight does a load need the Atlanta city permit?

Over 73,280 lbs gross, over 8 ft wide, over 55 ft long or over 13 ft 6 in high. A load heavy on a single axle or wheel needs ATLDOT's approval too, even under the gross limit.

Can my oversize load cut through Atlanta inside I-285 on the way to another state?

No. Georgia's permit rules make a permit invalid inside the perimeter unless the truck picks up or delivers there. A through load stays on I-285, and we route it that way.

Which weekday hours are closed inside the Atlanta perimeter?

7 to 9 a.m. and 3 to 6 p.m., Monday through Friday, even for a load with a delivery inside. Georgia's daylight travel window still applies around those hours.

What escorts does ATLDOT require on city streets?

Its published conditions call for escorts at the front and the rear, flashing lights, red flags at the widest points and WIDE LOAD signs on both escorts. We book them to match the permit.

Why can't a heavy truck take any street it wants to reach a site in Atlanta?

City code keeps vehicles with more than six wheels on designated truck routes, with exceptions mainly for pickup and delivery, and some northwest streets ban cut-through trucks outright. We plan the shortest legal approach and put it on the permit.

Does Fulton or DeKalb County come into an Atlanta move?

Inside city limits the streets are ATLDOT's and the state routes are Georgia's. If the route leaves the city on a county road, we check who maintains it and add whatever that road needs.

What sets the price of an Atlanta permit package?

The size and weight of the load, how many city streets the route uses, escorts, the tree check along the route, and the state legs. We quote the whole package before we file anything.

24/7 permit desk

Need a permit in Atlanta for this load?

Send the details once. We file with ATLDOT and GDOT / Georgia DPS, plus every other state on your route.